10 Best Monopod Shooting Stick
Updated on: June 2023
Best Monopod Shooting Stick in 2023
Primos Trigger Stick Gen3 Monopod Camo 33-65"
Vanguard Scout M62 Gun Pod With V Shaped Rotating Yoke, Quick Flip Leg Locks, Foam Hand Grip With Wrist Strap and Carabiner
- Lightweight aluminum alloy gun pod features rubber V shaped yoke
- V-shaped yoke swivels 360 degrees allowing shots from any angle
- 20mm aluminum alloy leg. Folded height: 22". Extended height: 62". 4 sections. Weight: . 57 lbs.
- Quick release leg clips allow legs to be extended and locked securely into place easily
- Gun pod includes cushioned foam hand grip, wrist strap, and rubber tipped foot
Firefield Monopod Shooting Stick
- Cork grip
- Shooting Rest
- Camera compatible with standard bolt
- Adjustable height
- Grip on all surfaces
Allen Company Shooting Stick, Monopod, Adjustable in Height (21.5 to 61 inches), Aluminium, Hunting Accessories, Black (2163)
- Lightweight aluminum gun monopod features V shaped yoke
- Gun pod includes padded foam hand grip and wrist strap
- Quick release leg clips allow legs to be extended and locked securely into place
- Black matte finish aluminum body
- Adjusts in length from 21. 5 to 61 inches
- Also works great as a camera staff
- included components: Hunting Range Gear Monopods
Allen Company Backcountry Adjustable Monopod Shooting Stick, Black, 61"
- Height adjusts to 61" tall
- Removable v-top
- Removable wrist strap
- Steel stick tip for hard surfaces, rubber crutch tip for dirt and soft surfaces
- Comfortable foam hand grip
Vanguard VEO 2 AM-234TU Shooting Stick, Tri-Stand Base with Ball Joint, Rotating and Removeable U Shaped Yoke
- The ball joint feature allows smooth pan and tilt options, and tri-stand's 3 feet easily fold and lock in seconds, stabilizing your shooting stick and allowing it to function like a tripod
- The 360-degree rotating, wide U-yoke has rubber fins to secure your rifle or crossbow, and U-yoke can be removed to accommodate cameras or spotting scopes
- Strong quarter twist leg locks provide a maximum load capacity of up to 11 pounds
- Soft rubber handle provides an unbeatable grip in any weather; VEO 2 AM-234TU can be used as a walking stick with the included hand strap and carabineer
- 4 section, 23mm aluminum leg. Folded length: 24. 4". Extended height: 64". Weight: 1. 96 pounds
Primos Trigger Stick Gen3 Monopod Camo 21-30"
- New Quick Detach Yoke System with Integrated Lock
- New Contoured Grip with No-Slip Backbone
- Strengthened Rotating Joint for Smooth Panning
- New Heavy Duty look with Dark Earth Accents
- Adjusts from 21″ to 30″
Hammers Telescopic Collapisble Shooting Stick Monopod Gun Pod w/V Yoke Rest Mount
- Collapisible 3sections fold to 30inch
- Aluminum alloy tubing
- Carbide steel tip
- V yoke
- Camera mount stud
Primos Hunting Trigger Stick Gen3 Bipod Camo, 24-62 Inches
- New Quick Detach Yoke System with Integrated Lock
- New Contoured Grip with No-Slip Backbone
- Strengthened Rotating Joint for Smooth Panning
- New Heavy Duty look with Dark Earth Accents
- Adjusts from 24″ to 61″
Primos Pole Cat 25 to 62-Inch Tall Monopod
- Seamless tapered-aluminum tube
- Lightweight
- Mobile, rugged, nylon yoke
- Tactile rubber v-grips
- Adjusts 25"-62"
- Three-piece mono pod is perfect for standing or kneeling
- Seamless, tempered Extreme-Spec aluminum tubes with patented Posy-Lock height adjustment
- Bench is stable, lightweight, mobile and silently adjusts from 25 to 62 Inch with a quick quarter-twist
- Rugged nylon yoke is strong, lighter than steel and will never rust
- Tactile rubber shooting V grips stock for steady shot; includes wrist strap
How to Clean a Bolt-Action Center Fire Rifle
This article will show you how to clean your rifle the right way. It will also let you know what items you will need to buy.
WARNING: Always make sure firearm is unloaded of live or spent ammunition.
First, you will need to remove the bolt from the rifle. most firearm manufactures have their own unique bolt release lever on the opposite side of the breach (which is the ammo loading and unloading side of the
firearm). If your rifle has a magazine (under side of rifle in front of trigger), you will need to remove that as
well. Some rifle's have either a single or duel magazine release lever, which you push in towards the magazine or away from it to release the magazine from the firearm.
The next step is to assemble the two or three small bore brush poles together by threading them end to
end until they are hand-tight. to end you will need to thread the correct size steel bristle bore brush into the
bore brush pole (opposite of the handle), to be able to clean the inside of the rifle barrel, then stand the rifle
on its stock (the opposite end of the rifle barrel) and slowly insert the bore brush into the barrel turning it clockwise as you gently push it down all the way through the chamber.
After inserting the bore brush all the way down to the chamber remove the brush by pulling it up and continuing
to rotate it clockwise, the bore brush, the bore brush poles, and handle rotate at the same time to avoid them
separating from each other in the rifle barrel.
Next you will need to remove the bore brush from the from the end of the bore brush pole. Once you have
done this, insert the correct threaded soft bore cleaning end, and repeat the same steps you preformed when you used the threaded hard bristle bore brush.
Then, remove the soft threaded bore cleaning end, and insert the slotted end. Then place a small flat piece
of cleaning cloth (cut to fit), through the slot in the end, and spray, or drop a small amount of gun oil on it.
Next you will need to insert the soft cleaning cloth, and bore rod into the rifle barrel and "gently" push down,
and rotate clockwise at the same time. Make sure to push the cleaning assembly all the way down through
the chamber.
After inserting all the way down through the the chamber remove cleaning assembly by "gently" pulling up and
rotating clockwise at the same time until it is completely removed from the rifle barrel. Now the inside of the
rifle is cleaned, oiled, protected - and ready for use.
WARNING: Always make sure the inside of the rifle barrel is free of obstacles, and that nothing has gotten lodged in the rifle barrel or breach / chamber ! !
Now, you will need to oil the outside of the rifle barrel, chamber, and scope. I prefer to use oil impregnated
soft cloth cleaning wipes, but you can use whatever you like, or feel comfortable with. Then spray a little gun
oil on the moving parts such as: the trigger, bolt, assembly, firing pin, and magazine. Wipe off any excess oil, slide the bolt assembly in and out, try the safety mechanism, and trigger (note: only "dry fire" or pull the trigger without ammunition in it once or twice as doing this repeatedly will damage the firing pin / trigger assembly),
and your bolt-action center firing rifle is ready to go with you on your next trip.
